Configuration 1

Operating Temp. Range:

+5 ÷ +40°C

 

Weight Kg:

approx. 4

 

Dimensions mm (LxHxW):

420x350x110

 

Supply Voltage:

24 Vdc

 

Connections:

Ethernet, USB

 

CNC Z32 S15 Fz

Z32 Central Unit with PC-Panel dimensions. Suited for cost effective solutions with, not renouncing to Z32 high performances:

• 15" TFT Touch screen
• USB ports available on the industrial PC port
• Conneced to Master Link MLKFZ with ethernet cable
• Can be shipped together with the miniqwerty alphanumeric keyboard MKCN
• LAN connection availability and teleservice
• Solid state Hard-disk
• Available only with FlorenZ operating system, cannot host the ZFlash programming software

IP Protection:

68

 

Operating Temp. Range:

+5 ÷ +40°

 

Weight Kg:

?

 

Dimensions mm (LxHxW):

272x135x12

 

Connections:

USB

 

MKCN Mini Qwerty Keyboard

• USB connected
• Italian layou
• Long-stroke silicon keys: 86 keys + 12 function keys

The Master Link MLK-FZ card manages the data exchange between the central unit of the Z32 CNC FlorenZ Series and all the peripherals (servodrives and I/O's).

The MLK module connections are:

• RTE (Real Time Ethernet): connection with the Z32 CNC central unit
• Z-Link: optical fiber bus for digital I/O's, analog references, analog inputs, encoder inputs (2mS sampling time)
• Z-Star2: optical fiber bus for SPevo digital servodrives (250μS sampling time)

• Allows PE3 I/O modules mounted beside (see I/O Modules description)
• Manages Z-Link I/O peripherals
• Manages directly up to 8 SPevo digital servodrives through the on-board Z-Star2 channel

• The additional Z-Star2 channel on the expansion card EXP-FZ1, manages 8 digital SPevo servodrives, allowing a total of 16 digital SPevo servodrives managed
• The presence of the EXP-FZ1 doesn't allow PE3 modules mounted beside

• The additional three Z-Star2 channels on the expansion card EXP-FZ3, manages 8 digital SPevo servodrives per channel, allowing a total of 32 digital SPevo servodrives managed
• The presence of the EXP-FZ3 doesn't allow PE3 modules mounted beside

In case no expansion card (EXP-FZ1, EXP-FZ3) is present, up to 8 PE3 I/O modules can be connected directly to the Master-Link, like it's shown in the picture:

PE3 modules directly connected to the Master Link

Possible solutions:

I/O Z-Link Modules

• The Z-Link optical fibre bus connects I/O peripherals to the Master-Link MLK
• The Z-Link is a loop optical fibre connection: departing from the Master-Link, connecting all the peripherals, and returning back to the Master Link
• Up to 25 peripherals are supported, with a mix of any type in any order
• Length of a single optical-fibre connection (between two consecutive peripherals): up to 30 m

The optical fibre, is totally immune to electricl noise. This means a complete compliace with EMC regulations.

Architecture scheme

D.Electron designs and produces digital drives for:

• 400Vac brushless motors (axes)
• 400Vac linear motors (axes)
• 400Vac torque motors (axes)
• 400Vac induction motors (spindles)
• 400Vac field-weakiening synchronous motors (spindles)
  
  

Z-Star2 drives system is composed of a power supply module that generates the 600Vdc bus and various power modules connected to the DC bus.

The communication between drives and Master-Link is done through an optical fibre connection: the optical fibre connection departs from the Master-Link, passes through all the servodrives and returns back to the Master-Link creating a loop connection, also called Z-Star2 channel.

TECHNICAL CHARCTERISTICS common to all Z32 central units

Z32 CENTRAL UNIT:

• Supports both CNC real-time functions and graphical interfaces
• FlorenZ operating system

CHARACTERISTICS:

• Milling and turning algorithms
• Special functions for plasma and laser cutting
• G-Code part-program
• Up to 10 axes synchronously interpolating
• Up to 11.000 blocks/s (G1/G2/G3 from internal memory)
• DNC execution for big part-programs stored on the hard disk
• More than 500 blocks dynamic look-ahead
• Sophisticated jerk control for reducing mechanical stress
• High-Speed-Machining and Supernishing for moulds
• Canned cycles and macros
• Rotary heads and tilting tables management (RTCP)
• Gantry axes
• Multiprocess: max 6 contemporaneous independent processes (channels)
• Manages up to 32 digital axes + 16 analog axes

FRONT-END SOFTWARE:

• FlorenZ operating system (personalized Linux distribution)
• D.Electron software suite
• Custom software hosting capability
• Optional Microsoft Windows® license for Windows softwares

• Possibility of custom, tailor made consoles (industrial PC, keyboard, software,...)

PLC AND INSTALLATION:

• Integrated software PLC with bidirectional real-time access to CNC data
• Fast PLC modules up to 2 ms, synchronized with the part-program
• PLC editor, debugger and digital software oscilloscope integrated in the CNC
• Black-Box function
• Simplied digital axes setting
• LAN connection through Ethernet TCP/IP
• Internet based teleservice