Z32 CNC: technology is our mission, personalization is our strength

Configuration 5

configuration 5 Z32 EFP15 FZ

CNC in Touch Screen console, version with machine control panel and long stroke qwerty keyboard:


  • icon CNC Z32 FP15 FlorenZ
  • icon KMU machine control panel
  • icon KCN Qwerty Keyboard
  • icon MLK-FZ
  • icon I/O Modules
  • icon Servodrives
  • Charact. Z32
CNC Z32 FP15 FlorenZ
Operating Temp. Range:
Temp. Amb. +5 ÷ +40°C
Weight Kg:
Dimensions mm (LxHxW):
Supply Voltage:
230 Vac
Ethernet, USB

CNC Z32 FP15 FlorenZ

Operator’s terminal including CNC, with touch-screen:

  • Connected to the electrical cabinet through a single Ethernet cable
  • FlorenZ-Linux operating system


CNC characteristics:

  • Mill and Lathe functionality
  • Special functions for plasma cutting and laser cutting
  • G-code part-program
  • Up to 10 interpolating axes programmable in a single block
  • Reading speed up to 11000 blocks/sec (G1/G2/G3 blocks from internal memory)
  • Huge dimensions part-programs executed in DNC from hard-disk
  • Dynamic look-ahead, more than 500 blocks
  • Sophisticaded jerk control limits the mechanical stress
  • High-speed machining and super-finishing for moulds
  • Canned cycles and macros
  • Full support for rotary heads and tables (5 axes RTCP for blades, blisks, moulds,...)
  • Gantry axes
  • Multiprocess: max 6 simultaneous and independent processes
  • Up to 32 digital axes and 16 analog axes


Operator’s interface software:

  • FlorenZ operating system (D.Electron distribution of Linux)
  • D.Electron operator’s interface software
  • Allows end-user interface personalization
  • Optional Windows license running in a Virtual Machine for running Microsoft Windows based softwares


PLC and installation:

  • Integrated PLC with bi-directional, real-time access to the CNC data
  • Fast sections of PLC down to 2 mS, synchronized with the part-program
  • Integrated PLC editor, debugger and digital oscilloscope
  • Black-box function
  • Easy definition of the digital drives settings
  • LAN connection through Ethernet TCP/IP
  • Teleservice via Internet
KMU Machine control panel
IP Protection:
20 rear / 65 front
Operating Temp. Range:
+5 ÷ +40°C
Weight Kg:
Dimensions mm (LxHxW):
Supply Voltage:
24 Vcc
Z-Link optical fibre

KMU Machine control panel

Cost effective solution for machine control panel:

  • Ooptical fibre connected to the Z-Link field-bus
  • Max distance between adjacent Z-Link nodes: 30m
  • Buttons for JOG management (axis, direction, feed, increment)
  • Emergency button
  • 9 user-definable buttons
  • Overrides Feed, Speed, Rapid
  • Electronic handwheel


Available I/O's for the console:

  • 24 optoisolated Inputs (24Vdc)
  • 8 Outputs 0.5A 24Vdc
  • 1 Handwheel Input
KCN Full Qwerty keyboard
IP Protection:
20 rear / 65 front
Operating Temp. Range:
+5 ÷ +40°
Weight Kg:
Dimensions mm (LxHxW):

KCN Full Qwerty keyboard

  • 105 long-stroke, soft-silicon keys
  • Special surface treatment for easy cleaning
  • Includes numeric pad

The Master Link MLK-FZ card manages the data exchange between the central unit of the Z32 CNC FlorenZ Series and all the peripherals (servodrives and I/O's).

The MLK module connections are:

  • RTE (Real Time Ethernet): connection with the Z32 CNC central unit
  • Z-Link: optical fiber bus for digital I/O's, analog references, analog inputs, encoder inputs (2mS sampling time)
  • Z-Star2: optical fiber bus for SPevo digital servodrives (250μS sampling time)
Master Link
  • Allows PE3 I/O modules mounted beside (see I/O Modules description)
  • Manages Z-Link I/O peripherals
  • Manages directly up to 8 SPevo digital servodrives through the on-board Z-Star2 channel
Master Link EXP+FZ1
  • The additional Z-Star2 channel on the expansion card EXP-FZ1, manages 8 digital SPevo servodrives, allowing a total of 16 digital SPevo servodrives managed
  • The presence of the EXP-FZ1 doesn't allow PE3 modules mounted beside
Master link EXP-FZ3
  • The additional three Z-Star2 channels on the expansion card EXP-FZ3, manages 8 digital SPevo servodrives per channel, allowing a total of 32 digital SPevo servodrives managed
  • The presence of the EXP-FZ3 doesn't allow PE3 modules mounted beside

In case no expansion card (EXP-FZ1, EXP-FZ3) is present, up to 8 PE3 I/O modules can be connected directly to the Master-Link, like it's shown in the picture:

PE3 modules directly connected to the Master Link

PE3 modules directly connected to the Master Link


Possible solutions:

  • MLK-FZ Digital Solution 32 axes +

    Soluzione Analogica
  • MLK-FZ Digital Solution 8 axes +

    Soluzione Analogica
  • MLK-FZ Analogic solution +

    Soluzione Analogica
  • 1

I/O Z-Link Modules

I/O Z-Link Modules

  • The Z-Link optical fibre bus connects I/O peripherals to the Master-Link MLK
  • The Z-Link is a loop optical fibre connection: departing from the Master-Link, connecting all the peripherals, and returning back to the Master Link
  • Up to 25 peripherals are supported, with a mix of any type in any order
  • Length of a single optical-fibre connection (between two consecutive peripherals): up to 30 m

The optical fibre, is totally immune to electricl noise. This means a complete compliace with EMC regulations.


Architecture scheme

D.Electron designs and produces digital drives for:

  • 400Vac brushless motors (axes)
  • 400Vac linear motors (axes)
  • 400Vac torque motors (axes)
  • 400Vac induction motors (spindles)
  • 400Vac field-weakiening synchronous motors (spindles)

Z-Star2 drives system is composed of a power supply module that generates the 600Vdc bus and various power modules connected to the DC bus.

The communication between drives and Master-Link is done through an optical fibre connection: the optical fibre connection departs from the Master-Link, passes through all the servodrives and returns back to the Master-Link creating a loop connection, also called Z-Star2 channel.

TECHNICAL CHARCTERISTICS common to all Z32 central units


  • Supports both CNC real-time functions and graphical interfaces
  • FlorenZ operating system


  • Milling and turning algorithms
  • Special functions for plasma and laser cutting
  • G-Code part-program
  • Up to 10 axes synchronously interpolating
  • Up to 11.000 blocks/s (G1/G2/G3 from internal memory)
  • DNC execution for big part-programs stored on the hard disk
  • More than 500 blocks dynamic look-ahead
  • Sophisticated jerk control for reducing mechanical stress
  • High-Speed-Machining and Supernishing for moulds
  • Canned cycles and macros
  • Rotary heads and tilting tables management (RTCP)
  • Gantry axes
  • Multiprocess: max 6 contemporaneous independent processes (channels)
  • Manages up to 32 digital axes + 16 analog axes


  • FlorenZ operating system (personalized Linux distribution)
  • D.Electron software suite
  • Custom software hosting capability
  • Optional Microsoft Windows® license for Windows softwares
  • Possibility of custom, tailor made consoles (industrial PC, keyboard, software,...)


  • Integrated software PLC with bidirectional real-time access to CNC data
  • Fast PLC modules up to 2 ms, synchronized with the part-program
  • PLC editor, debugger and digital software oscilloscope integrated in the CNC
  • Black-Box function
  • Simplied digital axes setting
  • LAN connection through Ethernet TCP/IP
  • Internet based teleservice


About Us

logo-delectron bianco

D.Electron is a company established in the beautiful city of Florence (capital of Tuscany region), specialized in design and manifacture of digital numerical control for machine tools.

D.Electron borns in 1977, around a nucleous of technicians already experienced in industrial automation for machine tools. more

Contact Information:

 Florence - Italy

Via Reginaldo Giuliani, 140 (ZIP 50141)

Tel: +39 055 416927

Fax: +39 055 434220



Contact us