Drives
Configuration 7
-
PRODUCTS
Operating Temperature Range °C:+5 ÷ +40
IP protection:54 front / 20 rear
Weight Kg:9,5 ≈
Dimensions (LxHxW) mm:363 x 571 x 100
Screen:21.5'' TFT LED color display (resolution 1920x1080 pixels) capacitive multitouch
Protective glass:5mm thick tempered glass
Supply voltage V:24Connections:Ethernet 10M/100M/1 Gbps, USB -
PRODUCTS
Operating Temperature Range °C:+5 ÷ +40
IP protection:20Weight Kg:3Dimensions (LxHxW) mm:101 x 413 x 268,5Supply voltage V:24Connections:Ethernet LAN 10M/100M/1 Gbps, VGA, USB -
PRODUCTS
The MLK-FZ Master Link manages the data exchange between the PC-based central unit of the Z32 FlorenZ Series CNC and the peripherals (drives and I/O).
Its connections are:
RTE (Real Time Ethernet): connection to the central unit of the CNC Z-Link: optical fiber bus for I/O, analog references, encoder inputs (2mS sampling time) Z-Star2: optical fiber bus for SPevo digital drives (sampling time 250μS)
Master Link
It supports PE3 I/O flanked modules (see I/O Modules section). It directly supports up to 8 SPevo digital drives, connected via the Z-Star2 CH1 channel.
Master Link+EXP-FZ1
The additional Z-Star2 channel on the EXP-FZ1 expansion board manages another 8 SPevo digital drives, for a total of 16 SPevo digital drives. The presence of the EXP-FZ1 expansion board does not allow PE3 flanked modules.
Master Link+EXP-FZ3
The three Z-Star2 additional channels on the expansion board manage an additional 8 SPevo digital drives per channel.
When there are no expansion boards (EXP-FZ1, EXP-FZ3) it is possible to connect up to 8 PE3 I/O modules directly on the Master Link, as in the figure:
PE3 modules flanked by the MLK
-
PRODUCTS
I/O Modules
I/O Z-Link Peripherals
The Z-Link fiber optic bus connects the I/O peripherals to the MLK-FZ Master-Link
- The Z-Link is a fiber optic ring connection which starts from the Master-Link, connects all the Z-Link nodes and ends on the Master-Link
- Up to 25 Z-Link peripherals are supported, with a mix of any type of input or output, in any order
- The maximum distance between the Master Link and the Z-Link node, or between the nodes, is 30 meters.
The optical fiber, completely immune to electrical noise of any kind, allows this bus to immediately comply with the strictest EMC standards.
-
PRODUCT
Servodrives
D.Electron designs and manufactures digital drives for:
- 400Vac brushless motors (axes)
- 400Vac linear motors (axes)
- 400Vac torque motors (axes)
- 400Vac asynchronous motors (spindles)
- 400Vac flux-weakened synchronous motors (spindles)
The Z-Star2 drives require a common power supply which generates the 600Vdc DC bus and various power modules connected to the DC bus.
The communication between the drives and the Master-Link is carried out via an optical fiber connection: the optical fiber connection starts from the Master-Link, passes through all the drives and ends on the Master-Link forming a ring connection, called Z -Star2 channel.
-
PRODUCTS
TECHNICAL FEATURES Z32
